Enplus AC022K-BE-24, Руководство пользователя

Страница: 10 / 20

- 9 -
2 Operation Instruction
2.1 Product Installation
2.1.1 Package Verification
Unpack to check and verify following items after receiving the charger:

Visual inspection on external appearance. In case there is any broken or damage, notify the seller
immediately.

Check accessory type and quantity. If there is quantity in short or type inconformity, make the record in
time and contact the seller at once.
2.1.2 Installation Preparation
1) Tools
Tool Name Photo Function
Multimeter
Check electrical connection and
electrical parameter
Cross Screwdriver
(PH2x150mm, PH3x250mm)
Tight the screws
Insulated Spanner Tight the bolts and nuts
Insulated Torque Wrench Tight the bolts
Combination Wrench Tight the bolts
Hydraulic Clamp Press OT terminals
Diagonal Pliers Cut cables