11
Copyright Enphase Energy Inc. 2010
141-00010 Rev 01
1.
Fan wires out as illustrated with the Environ below the wall opening.
As in the example, fan out the wires so that the C wire is above the C
terminal, the W above the W, and so forth. This allows the Environ to
fit snugly to the wall.
2.
Wires will position behind the Environ and up over the terminal area.
3.
Do not bunch wires behind the Environ. Feed any slack back into the
wall opening.
Connect Wires
1.
Connect labeled wires only to a terminal with the
same letter label.
2.
Insert the wire in the terminal well and tighten the
screw securely. Do not over-tighten, this will cut
the wire.
3.
If you are using a 24VAC transformer (such as
Radio Shack PN273-1690), connect it to the C and
RH terminals (no polarity).