Enovation Controls MURPHY PowerView, Руководство по установке

Страница: 6 / 17

Installation Kit
– P/N 78051451 includes
•
Mounting Bracket
•
Gasket/Panel Seal
•
Seven #8 washers
•
Seven 8-32 machine screws
•
Seven 10-
32 nuts 3/8”
•
Six 10-32 1-
3/4” machine screws
Tools needed.
•
Drill with 7/32 in. size bit
•
Jigsaw
•
Screw Driver
Preparing the Dash
Determine the location of the PV700 in the dash. Cut a hole in the dash to the
dimensions provided in the cutout templates.
Surface-Mounting the Unit
1. Place the back side of the display through the opening so the display will sit on the face
of the dash.
2. Use the included four long screws and locking nuts from the mounting kit (78051451) to
attach the unit to the bracket.
3. Torque to 10 inch-pounds.