Enovation Controls Murphy ML100, Инструкция по установке и эксплуатации

Страница: 12 / 16

Section 30 00-02-0842
2013-12-17 - 8 -
Feature Description
PowerView Model PV101-C Display For additional information on the PV101-C display, refer to
“00-02-0796 – PV101-C-v3.2 -Installation and Operations”
manual.
Yellow Fault/Warning Lamp Indicates when a warning is present via CAN
communications.
Red Fault/Shutdown Lamp Indicates when a shutdown is present via CAN
communications.
Request Regeneration Button Allows the operator to send a request to engine to perform
an active regeneration.
Inhibit Regeneration Button Allows the operator to send a message to the engine to
inhibit the engine from performing an active regeneration.
Throttle Increment Button Allows the operator to throttle engine up via CAN
communication utilizing TSC1 capabilities. Takes operator
to ‘Desired Engine Speed’ screen when pressed.
(Increment “Bump” = 25RPM, default adjustable;
Ramp Up “Hold” = 200RPM, default adjustable)
Throttle Decrement Button Allows the operator to throttle engine down via CAN
communication utilizing TSC1 capabilities. Takes operator
to ‘Desired Engine Speed’ screen when pressed.
(Decrement “Bump” = 25RPM, default adjustable;
Ramp Down “Hold” = 200RPM, default adjustable)
Key Switch Operator initiated cranking of engine via turning the key to
crank state.
Remote Stop Switch Operator initiated switch. Push to shutdown engine. Pull to
enable cranking via key switch.
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com