ENOTECNICA PILLAN BACCO 2, Инструкция по эксплуатации

Страница: 5 / 20

Filler BACCO
5
1.2 MACHINE MANUFACTURER DATA
ENOTECNICA PILLAN srl
Via , Chiesa n° 4-6 Loc. Rampazzo
CAP 36043 CAMISANO VICENTINO (VI) Italy
Tel.: +39 0444 - 719004
Fax: +39 0444 - 719044
e-mail : info@enotecnicapillan.it
sito : www.enotecnicapillan.it
1.3 TECHNICAL ASSISTANCE
After-sales service is available to Clients for:
- clarifications and information;
- spare parts shipment.
ATTENTION: remember that:
- the Client is under the obligation to buy always original spare parts or spare parts
authorized by the manufacturer;
- the disassembly or assembly of parts must be done by qualified personnel, following the
manufacturer’ s instruction;
- the use of no original parts and defective or incorrect assembly relieve the manufacturer
from any responsibility.
1.4 WARRANTY
ENOTECNICA PILLAN s.r.l. guarantees that the machine was built in compliance with existing norms, in particular
those related to the health and safety or workers.
The product warranty lasts 12 months; electrical parts are excluded from the warranty.
All expendable items are also excluded from the warranty.
The buyer has the right to substitute defective parts exclusively, after confirmation has been made at our
headquarters or at the Client’s location, with charges applied for transfer costs and labor fees. Transportation fees
for defective parts are at the buyer’s expense and are excluded from the warranty.
Damages derived from mishandling the machine, non-compliance with maintenance norms, as well as erroneous
manoeuvres by operators are excluded from the warranty.
Any tampering with the product, especially with the safety devices, will decay the WARRANTY and relieve the
Manufacturer of any responsibility.
No compensation is due for any machine inactivity.