3.5 CE Approval Requirements
The devices bear the EC conformity marking CE and conform to the R&TTE EU-directive on
radio equipment. The assembly conforms to the European and national requirements of
electromagnetic compatibility. The conformity has been proven and the corresponding
documentation has been deposited at EnOcean. The devices can be operated without
notification and free of charge in the area of the European Union, in Switzerland, in Croatia, in
Cyprus, in Czech, in Estonia, in Hungary, in Latvia, in Lithuania, in Malta, in Poland, in
Romania and in Slovenia. The following provisos apply:
•
EnOcean RF devices must not be modified or used outside their specification
limits.
•
EnOcean RF devices may only be used to transfer digital or digitized data. Analog
speech and/or music are not permitted.
•
The final product incorporating EnOcean RF devices must itself meet the essential
requirement of the R&TTE Directive and a CE marking must be affixed on the final
product and on the sales packaging each. Operating instructions containing a
Declaration of Conformity has to be attached.
•
If transmitters are used according to the regulations of the 868.3 MHz band, a
so-called “Duty Cycle” of 1% per hour for each transmitter must not be
exceeded. Permanent transmitters such as radio earphones are not allowed. For
conventional applications, it must be ensured that the PTM 200 radio device is
not operated more than 6000 times within one hour
(one operation: energy
bow is pressed and released). Within this calculation, the extraordinary short
telegram length is considered including three subtelegrams (see Chapter 2.3.3).
Also a tolerance of 5% in the telegram length is included.
3.6 FCC/IC Approval Requirements
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. If
this device is operated in compliance with the following requirements it can be operated
without notification and free of charge in the area of the United States of America and in
Canada. Operation is subject to the following two conditions:
(1)
this device my not cause harmful interference, and
(2)
this device must accept any interference received, including interference that
may cause undesired operation.
Trade Name: PTM 200
Model No: PTM 200
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions. (1) this device my not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC ID: SZV-PTM200
IC: 5713A-PTM200
©EnOcean GmbH, A. Anders
Page 19 of 22
PTM 200 User Manual V1.1
