© 2020 EnOcean | www.enocean.com
PTM 210 / PTM 215 / PTM 215U / PTM 215J User Manual May 2020 | Page 36/37
USER MANUAL
PTM 210 / PTM 215 / PTM 215U / PTM 215J
DC Step code and later
7.2
PTM 210U: FCC and Industry Canada Regulatory Statements
This device complies with part 15 of the FCC rules and Industry Canada ICES- 003. Opera-
tion is subject to the following two conditions: (1) This device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications not expressly approved
by manufacturer could void the user’s authority to operate the equipment.
When the product is placed on the US / Canadian market, it must carry the Specified Radio
Equipment marking as shown below:
IMPORTANT! Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils ra-
dio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’ap-
pareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
IMPORTANT! Tous les changements ou modifications pas expressément approuvés par la
partie responsable de la conformité ont pu vider l’autorité de l’utilisateur pour actioner cet
équipment.
7.3
PTM 210J: Japanese Type Approval
PTM 210J complies with the Japanese radio law and is certified according to ARIB STD-T108
V1.0 (2012-02). There is a certification marking on the back side of the module.
When the product is placed on the Japanese market, it must carry the Specified Radio
Equipment marking as shown below:
FCC ID:
SZV-PTM210U
IC:
5713A-PTM210U
