EnOcean EDK 350, Руководство пользователя

Страница: 8 / 28

EDK 350 / EDK 352 / EPK 350
User Manual
Page 8 ©EnOcean GmbH 2013
2 First Steps and Demonstrations
2.1 Demonstration of ‘1-Channel Relay Switch’ and ‘Learn-Concept’
The TCM 320 module has already several pre-implemented features for building automa-
tion. The 1-channel relay mode is used to switch on and off a module pin. If you connect
a relay to this pin you can switch a line-powered device.
1. Plug TCM 320 into EOP 350 and set jumper to 1-CH ACT
2. Connect EOP 350 with USB power (e.g. PC)
3. Learn PTM switch ID to TCM 320:
- Press LEARN button on EOP 350 > 0.5s

LMI LED will light, CH0 will flash
- Push switch rocker one time to send learn telegram
- Finish learn mode with LEARN button > 0.5s
4. Push PTM switch to toggle CH0 LED (relay pin)
Attention:
- Example works only with TCM 300/320 standard firmware and rocker on PTM switch.
- If you have replaced TCM firmware, load TCM 320 default firmware from website.
- Pushing the switch a second time during learn mode will delete the ID.
- Operating mode can only be changed after deleting all Ids.
- During learn mode supply voltage needs to be stable to avoid flash corruption.