ENNOLOGIC LIGHT METER EL200K-QUICK-START GUIDE
1
Install the Batteries
Use a screwdriver to unscrew the battery compartment
cover on the back of the unit and insert the four AA
batteries included in the package. Make sure the
polarity is correct (match the positive and negative
terminals according to the diagram inside
the battery compartment.)
Reinstall the battery cover.
Open the Package
When you open the package, you should
find your manual, your light meter, its
carrying case, an analog output interface
cable, and 4x AA batteries. The manual is
located inside the lid, behind the foam.
1
2
EnnoLogic Light Meter eL200K
Quick-Start Guide
WHEN YOUR LIGHT METER ARRIVES