Tauro Eco
TM
LED HIGH BAY
/ LOW BAY LED
LIGHTS
INSTALLATION INSTRUCTIONS
EASY INSTALLATION
Comes with
3
m Australian Flex and Plug
and eye bolts
as standard
.
A mouting bracket is available as an optional extra.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
2.
To avoid the possibility of electrical shock, turn o
ff
power supply before
installa on or servicing. Installa on and servicing should be performed
by
a
quali
fi
ed
electrician
and in accordance
the latest wiring regulations
.
Light must be operated within its specified operating parameters and in
accordance with our warranty requirements.
These documents are available on our website.
TO INSTALL:
Model No.
HB80-5000-xx
HB120-5000-xx
HB160-5000-xx
HB200-5000-xx
HB240-5000-xx
80W
120W
160W
200W
240W
Power
366 x340 x156 mm
439 x340 x156 mm
512 x340 x156 mm
585 x340 x156 mm
658 x340 x156 mm
Dimension
4.3 kg
5.2 kg
6.0 kg
7.0 kg
7.8 kg
Weight
100-240V/277V AC, 50/60Hz, Suitable for Wet Loca ons (IP65), Class I
*This product must be
earthed
xx denotes 60° / 90° / 110° degree beam an
gle
Optional Mounting
Bracket shown
STEP
3
:
Connect the power plug to a mains power
socket.
SUSPENSION
MOUNTING
STEP 1:
Attach your preferred hanging chain (not
supplied) to the four eye bolts on fitting
.
STEP 2:
Secure hanging chain to ceiling.
Use one of the mouting methods described below
STEP 3:
Loosen the moun
Ɵ
ng bracket screws, adjust
the
fi
xture to desire
d
posi
Ɵ
on, re-secure the
screws.
STEP 4:
Connect the power plug to a mains power
socket.
PENDANT MOUNTING
STEP 1:
Assemble the moun
Ɵ
ng bracket to the
fi
xture
by provided M10 (3/8”) round head screws.
STEP 2:
A
Ʃ
ach Lock-Nut(A) to the bo
Ʃ
om of the
Pendant Stem. A
Ʃ
ach Lock-Nut(B) by holding
the interjacent Fixture Bracket and
Ɵ
ghtening
Lock-Nut(B) un
Ɵ
l secure. See
Figure
1
.
1
2
Look-Nut(A)*²
Look-Nut(B)*²
Pendant Stem*¹
Pendant Stem Thread
*¹ Pendant Stem can not be so
Ō
material (not-provided)
*² Look Nuts are not provided
Power Cord
(Cord Not shown)
Power Cord
(Cord Not shown)