STARTING &
OPERATING
PROCEDURES
STARTING & OPERATING 15
05
It’s important to understand the functionality as well
as the limitations of your Miller SE ebike to ensure you
continue to enjoy the riding experience it provides for
many years to come.
1. MAXIMUM RIDER WEIGHT - The maximum rider
weight of your Miller SE ebike is 264lbs, or 120kgs. Rid-
ing with a weight larger than this may cause the ebike
components to fail and may lead to serious injury.
2. TORQUE / SPEED SENSOR - Your Miller SE ebike’s
motor and controller are designed to provide you as-
sistance as you pedal. Once you begin pedalling, the
system senses rotations in the crank as well as the
pressure you are placing on the pedal, in-turn switching
on the hub motor to propel you further. Once you stop
pedalling the system senses this, and cuts off power to
the motor. The amount of power the motor is ‘told’ to
output and the corresponding top speed is dictated by
the PAS level selected.
3. PEDAL ASSIST (PAS) - The level of PAS you set
dictates the amount of power and speed that will be
achieve whether you’re wanting assistance as you ped-
al. Your Miller SE ebike comes with 5 programmed lev-
els of PAS, with 0 being no assistance and 5 being the
most assistance possible. The levels in between 0 and
5 are incremental levels of speed and power.
After you have powered on the bike and display, simply
press the Up and Down buttons to affect the level of
PAS.
4. EXTENDING BATTERY LIFE - The following tips can
help extend your range and overall battery life:
+ Where possible, assist the motor by pedalling. Partic-
ularly when climbing hills, accelerating from stand-still,
or when carrying loads.
+ Avoid activating the brakes while pedalling at the
same time. This will lead to over heating and potential
damage of internal components.
+ Reduce power output particularly when climbing hills
by dropping the PAS to 1 or 2.
+ Cycle the battery from full to empty to full periodical-
ly.
+ Avoid storing your bike with the battery at full charge.
Ideally, batteries should be stored at 40%-50% charge
to maximize battery life. The battery will discharge
slowly when stored, requiring charge from time to time.
+ Never leave your battery empty.
+ Accelerate slowly by starting in a low PAS and
switching up as you pedal along.
+ Avoid constant stopping and starting, instead try to
maintain a constant pace.
+ Avoid operating your ebike in extreme temperature
environments such as snowy or heatwaves.
UNDERSTANDING THE OPERATING
PROCEDURES OF YOUR EBIKE WILL
HELP MINIMIZE THE POTENTIAL RISK
OF INJURY.
