background image

 
 
 
 
ENIGMA XM88422 Digital Receiver 

 

Version 1.50 

 

 

1. Introduction 

The  ENIGMA  XM88422  is  a  multi-line,  multi-format 
digital  receiver  for  commercial  fire  and  burglary 
monitoring.  The  standard  unit  consists  of  a  CPM 
Central Processing Module, a DLCM Dual Line Card 
Module  and  a  PWR  Power  Module.  With  additional 
Dual Line Card Modules, the receiver can be enabled 
to  monitor  up  to  30  telephone  lines.  The  ENIGMA 
XM88422  can  receive  and  decode  most  of  the 
popular and commonly used communication formats. 
See Appendix B. for details 
 
The  ENIGMA  XM88422  stores  all  events  with  time 
and date stamped. All information is displayed on the 
large  LCD  screen,  and  the  events  may  be  printed 
and/or  forwarded  to  a  computer.  To  ensure  security, 
all  programming  functions,  including  the  adjustment 
of the real time clock and date is password protected. 
 

CPM Unit 

The Central Processing Unit controls the operation of 
the  receiver.  Along  with  its  large  graphical  LCD 
screen, the CPM Unit incorporates two serial and one 
parallel  interface  for  computer  and  printer  interface. 
The  CPM  Unit  has  two  external  inputs,  one  for 
external 

acknowledge, 

and 

one 

for 

tamper 

recognition.  The  CPM  Unit  also  incorporates  two 
programmable outputs, which can be programmed to 
follow different receiver status.  
 
The  CPM  Unit  features  a  4096-event  non-volatile 
memory  buffer.  The  contents  of  the  buffer  may  be 
browsed  on  the  LCD  screen.  If  the  printer  or 
computer  is  off-line,  the  CPM  Unit  will  retain  the 
incoming  events  in  its  buffer,  and  will  automatically 
forward them, when the connection restores. 
 
The  CPM  Unit  has  a  large  graphical  LCD  display 
which  enables  the  CPM  to  implement  unique,  user 
friendly  features  like  changeable  display  font  sizes, 
and  pull-down  menus  and  dialog  boxes  for 
programming. 
 

Line Cards 

Each  Dual  Line  Card  Module  contains  two 
independent  Line  Cards  and  each  Line  Card  can 
monitor  a  telephone  line.  The  Line  Cards  contain  a 
1600-event event memory to record events and caller 
information.  Caller  Identification  capability  is  built-in 
and the telephone number of the calling party can be 
displayed,  printed,  stored  in  memory  and  forwarded 
to  the  automation  computer.  The  Line  Cards  also 
support the 2-way audio listen-in.  
 

The  Line  Cards  are  continuously  supervised  by  the 
CPM  Unit  to  ensure  uninterrupted  communication. 
Any  trouble  conditions  are  immediately  reported  on 
the LCD screens and printer and/or forwarded to the 
computer.  The  Line  Card  Module  also  verifies  the 
communication  with  the  CPM  Unit.  In  case  of  CPM 
malfunction  the  operator  will  be  advised  with  an 
audible indication and the Line Cards will continue to 
function  in  stand-alone  mode,  with  their  individual 
LCD  displays  and  controls.  Each  Line  Card  will 
continue receiving events and store them in its buffer. 
The  events  will  be  forwarded  to  the  CPM  Unit  after 
the connection restores. 
 

Power Module 

The  Power  Module  supplies  the  power  for  the  other 
modules in the receiver. It requires 16.5 VAC from a 
115  or  230  VAC,  50/60  Hz,  transformer.  The  Power 
Module  is  equipped  with  automatic  battery  charger 
and backup battery connections. In case of AC failure 
the  Power  Module  automatically  switches  to  backup 
battery  power.  The  backup  battery  capacity  can  be 
between 7 and 15 Ah. The Power Module supervises 
the  presence  of  the  battery  and  the  battery  capacity 
and the current status is reported to the CPM Unit. 
 

Compatibility 

 
The 

ENIGMA 

XM88422 

Digital 

Receiver 

is 

compatible with the most commonly used automation 
software  packages.  The  receiver  has  been  tested 
with the following software: 
 

 

Alarm SyS  

 

SIMS II 

 

Microkey SIS 

 
For  other  automation  software,  generally,  it  can  be 
used with selecting the Surgard interface. 

Содержание XM88422





































Отзывы: