BEFORE YOU BEGIN
1329095-AN2-A July 2017
INSTALLATION
INSTRUCTIONS
TAPWARE
Englefield
STUDIO
Pin Lever Wall-Mount
Basin Mixer
20149A-4
If you are building a
bathroom from scratch,
giving your bathroom a
makeover or just replacing
an old tap, Englefield can
provide a solution for you.
All information is based on the latest product information available at the time of
publication. ENGLEFIELD reserves the right to make changes in product
characteristics, packaging, or availability at any time without notice.
Please leave this installation guide for the consumer as it contains
important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove any debris.
2. An in-line water filter must be used with this product.
3. If possible, install this mixer before installing basin.
4. Ensure all local plumbing codes are observed.
5. Recommended working pressure: 100kPa to 500kPa.
6. Maximum working pressure: 800kPa.
7. If pressure exceeds 500kPa, a pressure limiting valve must be installed.
8. All installations should comply with the relevant requirements of AS/NZS 3500
and AS/NZS 6400.
ROUGH-IN
NEW ZEALAND
KOHLER NZ LTD
Free Ph: 0800 100 382
Free Fax: 0800 664 488
www.englefield.co.nz
AUSTRALIA
KOHLER CO.
Free Ph: 1 800 ENGLEFIELD
(1 800 364 533)
www.englefield.com
For warranty information, please visit our website
Page 4
1329095-AN2-A July 2017
Englefield
INSTALLATION INSTRUCTIONS
STUDIO
Pin Lever Wall-Mount Basin Mixer
185.5
G1/2”
168
85.5
G1/2”
185
120
6
7
8
9
10
11
12
13
14
15
16
17
1
2
3
4
5
11
Grub Screws
1250284
12
Spout
1329216-**
13
Washer
1250285
14
Aerator
1250293
15
Aerator Shell
1250290-**
16
Grub Screw
1250284
17
Plug
1250283-**
No.
Description
Part No.
1
Pin Lever
1329093-**
2
Bonnet
1250279-**
3
Nut
1250281
4
Cartridge
1250275
5
Mixer Face Plate
1329213-**
6
O-Ring - Mixer
Face Plate
7
O-Ring
1250325
8
Spout Face Plate
1329215-**
9
Spout Adaptor
1250328
10
O-Ring
1250324
** Please specify a colour when ordering:
-CP (Chrome),
-BN (Brushed nickel),
-BL (Matte Black)
1329214
SPARE PARTS LIST
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with a
clean soft cloth. Many cleaners may contain such chemicals as ammonia, chlorine, toilet chemicals etc. which
could adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Englefield tapware.
CONTACT AND WARRANTY INFORMATION
