Last update: 2022/02/16 09:15
manual_mcf-lw06424 http://www.enginko.com/support/doku.php?id=manual_mcf-lw06424
http://www.enginko.com/support/
Printed on 2022/02/16 09:16
Once the passwords are setted, to gain access from LoRaWEB to the sensor, set the right values
before reading from the device:
To bring back the sensor to factory default and reset the passwords, a reset code must be requested
to enginko (please provide the DevEUI of the sensor when you ask for that code).
8 General configuration file
WIth LoRaWEB is possible to configure the device using an XML file, instead to manually adjust the
parameters (for details about the file format please ask to enginko). This is very useful especially in
case of multiple devices configuration.
With “Save” button an XML file with the actual configuration of the sensor will be generated. This is
useful to store or clone the configuration, or to send it to enginko's support if needed.
