Last update: 2022/02/16 09:15
manual_mcf-lw06424 http://www.enginko.com/support/doku.php?id=manual_mcf-lw06424
http://www.enginko.com/support/
Printed on 2022/02/16 09:16
the latest measure.
When values are falling below the negative thresholds, the device sends a new uplink with the latest
measure.
Thresholds can be enabled, disabled and changed va USB with LoRaWEB or with downlinks:
4.3 Other settings
DST:
set to change DST (default: none).
Time sync uplink:
set to disable time synchronization request (default: enabled).
Normally sensor asks for a time sync at every power on (uplink starting with 01) or once a week. If no
or wrong reply received, it will retry after 1 week.
