background image

31

Wireless Settings

Device Name:

 Enter a name for the device. The name you 

type appears in SNMP management. This name is not the 
SSID and is not broadcast to other devices.

Band Steering:

 Enable Band Steering to send 802.11n 

clients to the 5 GHz band, where 802.11b/g clients cannot 
go, and leave 802.11b/g clients in 2.4GHz to operate at 
their slower rates. Before implementing this feature, we 
suggest you to assure the both 2.4GHz and 5GHz SSID, 
as welll as security settings must be the same. EnGenius 
Band Steering supports following advanced settings,

*

Force 5GHz

: When band steering is configured to Force 

5GHz mode, the AP will not dual band capable client 
devices to network to the 2.4GHz band only if the client 
devices are not currently associated on 2.4GHz radio in 
this AP.

 *

Prefer 5GHz

: When band steering is configured to Prefer 

5GHz  mode, the AP will steer dual band capable client 

devices to 5GHz radio when the RSSI value of these client 
devices on 5GHz radio is more than set one. The allowed 

RSSI value for default setting is -75dBm.

 *

Band Balance

:  When  band  steering  is  configured  to 

Band Balance mode, the AP will steer dual band capable 
client devices to 5GHz when the RSSI value of these client 
devices on 5GHz radio is more than set one. To evenly 
allocate RF resource on the both 2.4GHz and 5GHz radios, 
users also can set the portion of client devices on 5GHz 
radio to assure smoothly connection. The default value of 

the 5GHz radio is 75%.

Save:

 Click 

Save

 to confirm the changes.

Wireless

Содержание EWS357AP v3/ECW220 v2





























































Отзывы: