2
a. Scroll through records and menu selections.
b. Adjust receiver voice volume when in the Talk mode.
c. Press
to review call log when in the Standby mode.
d. Press
to enter phonebook when in the Standby mode.
6.
END; On/Off Key (
)
a. Ends a call.
b. Leaves current menu operation, up one level.
c. Press for 3 seconds to off the power
Base features
1.
Antenna
a.
The antenna port has a
normal thread connector
; to remove antenna or cable, turn counterclockwise; to install, turn
clockwise. Improper installation may damage the connector.
b.
When using an outdoor antenna, locate the antenna (not the base station itself) as high as possible for a clear
transmission path.
2.
LED
a.
Power (blue color): it indicates base station has power.
b.
L1/L2 (white color): it indicates the active telephone line (line 1 or line 2).
3.
RESET Button
a.
Restores base station to factory settings
b.
Reset button is intended to prevent accidental system reset.
c.
All handsets (including administrator) and additional base(s) need to be re-registered after a base station reset.
4.
REG button for Registration and Page
a.
Press and hold this
REG
button 3 seconds to enter registration mode.
b.
To search a misplaced handset; press
REG
button, all registered handsets beep for 30 seconds. Press
REG
again or any key
on handset to stop.
5.
Line Jack (L1/L2): Standard RJ-11C/CA-11A connector to plug in the telephone line.
6.
Audio in Jack (3.5mm): Connect to an external device for music on hold
7.
Console jack: Jack for firmware upgrade (Type-B USB connector)
Re: Please consult with EnGenius Tech support about the firmware upgrade.
8.
DC In: to plug in the power adaptor