User Manual - Flashlight DVR
Version No.: 1.5
The descriptions included are subject to minor change without notice.
PACKING LIST:
1 Flashlight DVR x 1
2 USB Cable x 1
3 CD x 1
4 Adapter x 1
5 Rope x 1
6 Lithium Battery x 1
STRUCTURE:
DIAGRAM OF OPERATION:
Install Lithium Battery:
Unscrew the handle of flashlight DVR. Install the Lithium battery into
the handle. Screw the handle of flashlight DVR back on.
Charging the Battery:
Remove the waterproof plug. Connect the power adapter to the
flashlight DVR. The indicator light will be green while charging and
turns off after fully charged.
Setting Date and Time:
If you find that the date/time of the video does not match your local
date/time, the following steps will allow you to change the date and
time:
Connect the Enforcer Flashlight DVR to the computer with the
USB cable. Open My Computer and you will see the USB Mobile Disk
folder icon.
Insert the CD in to the CD-ROM drive.
Open the CD, copy the “getsystemTime.exe” file to the Mobile Disk
folder in the in the DVR Flashlight.
Once the “getsystemTime.exe” file is copied to the Mobile
Disk folder, double click “getsystemTime.exe”, the system will
automatically update the date and time.
Use as a Flashlight:
Press the Light button once, bright LED light; Press again, low-light
LED lights; Press a third time to turn off the LEDs.
1.
2.
3.
4.
Indicator (Built-In)
Record/Stop Button
Light Button
Bright LED
Low-Light LED
Lens
Handle
Charge Indicator
Power Socket
USB Socket
Waterproof
Plug
Low-Light LED
These photos are for reference only. Please refer to actual product.
1
2
3
4
5
6
