ENFORCER DC Switching CCTV Power Supply
4
SECO-LARM
U.S.A., Inc
7.
If voltage drop is large, adjust the output
voltage trimpot as shown in Figure 7.
NOTE /
REMARQUE
:
The output voltage
trimpot changes voltage for all outputs.
Test all outputs to ensure voltage does not
exceed device specifications.
Le
potentiomètre de tension des sorties
change la tension de toutes les sorties.
Vérifiez toutes les sorties pour assurer que
la tension ne dépasse pas les
spécifications de l’appareil.
Also Available from SECO-LARM:
CCTV Power Supplies
PS-D1610-BUQ
CCTV Cameras
EV-2726-NFGQ
DVRs
DR-1 Series
Baluns
EVT-PB1Q
DC Connectors
CA-161T / CA-151R
Voltage Converters & Boosters
ST-HB105-TTQ
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship
while used in normal service for a period of one (1) year from the date of sale to the original consumer
customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the
unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by
or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and
workmanship. The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be
limited to replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be
liable for any special, collateral, incidental, or consequential personal or property damages of any kind
to the purchaser or anyone else.
NOTICE:
The information and specifications printed in this manual are current at the time of
publication. However, the SECO-LARM policy is one of continual development and improvement. For
this reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is
also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced
or copied, in whole or in part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-mail: sales@seco-larm
.
com
MiPS-Uxxxx-PULQ_1312.docx
Order part # 764-507-3%
PITSW1
Figure 7 – Adjusting output voltage
12VDC Switching CCTV Power Supply
Manual
Model
Number
Number of
Outputs
Total Supply
Current
Max. Current
per Output
PS-U0406-PULQ
1
PS-U0406-PTQ
4
6A
2.5A
2
PS-U0906-PULQ
1
PS-U0906-PTQ
9
6A
2.5A
2
PS-U1806-PULQ
1
PS-U1806-PTQ
18
6A
2.5A
2
PS-U1812-PULQ
1
PS-U1812-PTQ
18
12A
2.5A
2
PS-U3612-PULQ
1
PS-U3612-PTQ
36
12A
2.5A
2
1
UL approved models and includes power cable with NEMA 5—15 plug connector.
2
Positive Temperature Coefficient (PTC) output fuse rating
PS-U0906-PULQ shown
Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.
Audio/Video Apparatus
26BZ
