ENFORCER Rack-Mount DC CCTV Power Supply
4
SECO-LARM U.S.A., Inc.
Power does not turn on
•
Check front panel LEDs and rear main fuse.
•
Ensure the power cord is firmly in its socket.
Power cycles on and off
•
The unit may be overheating
.
Check for heat sources nearby and ensure
ventilation holes are free from obstruction.
Voltage drop is large
•
Use 18 gauge or thicker wire.
The camera case is hot
•
Check that the correct power is being supplied.
Replacing the Main Fuse:
12VDC Switching CCTV
Power Supplies
Power Adapters
4-Channel "Brick"
Power Supply
PC-U1820-PULQ shown
ST-UV12-S2.0Q shown
PA-U0405-NULQ
Also Available from
SECO-LARM
®
:
Troubleshooting:
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
PICSN7
MI_PH-U1820-PULQ_190521.docx
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves
the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the
property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2019 SECO-LARM U.S.A., Inc. All rights
reserved.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper
or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not
operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM
and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s option. In no event
shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damage of any kind
to the purchaser or anyone else.
CAUTION:
To reduce the risk of electric shock, do not open the product case. There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF SHOCK
DO NOT OPEN
1.
The main fuse is at the back of the unit, between the AC cord socket and the ON/OFF switch.
2.
To check or replace the fuse, first power down the unit and disconnect the power cord.
3.
Use a flat-head screwdriver to gently lever the fuse holder out at the place indicated in the
diagram below. Be careful not to damage the soft plastic fuse holder with the screwdriver.
®
PH-U1820-PULQ
Rack-Mount DC CCTV Power Supply
Manual
Features:
•
18 Outputs, 20A total
•
PTC fuse protected outputs, 16 outputs at
1.6A and 2 outputs at 5A
•
11.7~13.6 VDC field-adjustable output
•
110/220 VAC Input with selection switch
•
LCD Display of output voltage and total
output current
•
LED Status indicators for each output
•
Removable screw terminal blocks for
convenient installation and reliable
connections
•
For rack mounting or stacking on a shelf
•
Compact 1U size fits standard racks
•
Attractive, high-tech industrial design
AUDIO/VIDEO APPARATUS
26BZ
