ENFORCER CCD B
ULLET
C
AMERA
Manual
ENFORCER CCD B
ULLET
C
AMERA
Manual
SECO-LARM
®
U.S.A., Inc.
, 16842 Millikan Avenue, Irvine, CA 92606
The information and specifications printed in this manual are current at the time of publication.
However, SECO-LARM's policy is
one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without
notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2003 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied,
in whole or in part, without the written permission of SECO-LARM.
file: BULLET_IMU0803.P65
• Check that the camera is powered up.
• Check that the monitor is powered up.
• Check that the video cable connecting the camera to the monitor is connected properly.
• Clean the lens (using a soft, clean cloth).
• Check that the light source is adequate.
• Adjust the monitor’s contrast knob.
• Change the position of the camera
• Change the position of the camera
• Change the position of the camera
• Check that the correct power supply is in use.
The screen is blank
The screen image is dim
The screen image has poor contrast
The screen image flickers
The screen image is distorted
The camera case is hot
TROUBLE SHOOTING
MANUAL
ENFO
RCER
EV-1324C12 & EV-1354C12*
1/4” CCD Color Bullet Cameras
EV-1323B12 & EV-1353B12*
1/3” CCD B/W Bullet Cameras
SECO-LARM
SECO-LARM
SECO-LARM
SECO-LARM
SECO-LARM
®
®
®
®
®
U.S.A., INC.
U.S.A., INC.
U.S.A., INC.
U.S.A., INC.
U.S.A., INC.
VIDEO
®
FCC COMPLIANCE STATEMENT
Information to the user: This equipment has been tested and found to comply with the limits for a class a digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
WARRANTY
All
SECO-LARM
products are warranted against defects in material and workmanship while used in normal service for a period of two
(2) years from the date of sale to the original consumer customer. Our obligation is limited to the repair or replacement of any defective
part if the unit is returned, transportation prepaid, to
SECO-LARM
. For complete details regarding the
SECO-LARM
warranty, please
contact
SECO-LARM
.
IMPORTANT
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and
statutes related to monitoring and recording audio and video signals.
SECO-LARM
will not be held responsible for the use of this product
in violation of any current laws or statutes.
WARNING
This product was designed for indoor use only. Mounting outdoors or exposure to rain or moisture could cause a dangerous electric
shock, damage the device, and void the warranty. Do not open the case of this device, as there are no field-serviceable components inside.
*Note: CCIR/PAL cameras available by special request only.
