3
SUBMERSIBLE PUMP
USER’S MANUAL
EWP-SUB-103GPH
PUMP INSTALLATION
PRODUCT PARAMETER INFORMATION
Attach the safety line (sling) (Figure 8).
Note: The safety wire (rings) should
be corrosion-resistant.
a) Insert the safety line
(not including the parts) and lift
the plate hole.
b) Fix the line about 1-2 feet (30-60 cm)
above the pump using the appropriate
connector.
Note: Use straps to lower 6 feet (1.8 m).
Straps will prevent avoidable damage.
Hoses, safety cables and cable connections
(Figure 9).
Pump chamber design structure: three chamber diaphragm pump
Diving depth: 100 feet (30 meters)
Input voltage: DC24V
Maximum head: 230 Feet (70 m)
Motor: DC permanent magnet motor; with temperature control
Outlet interface: 1/2 "(12.7mm)
Current: 6.0A MAX
Inlet: 50 mesh stainless steel filter
Fuse: 8.0 AMP
Open flow: 6.5LPM ± 5%
Power: 140W MAX
Waterproof parts Material details: nylon, PPS, POM rubber;
304 stainless steel
Reflow range: 110-120PSI
