enervent Fenix 120, Инструкция по установке и эксплуатации, Страница: 16 / 31

16
CHANGING THE HANDEDNESS
The unit is delivered left handed from the factory. The handedness can easily be changed.
The ceiling mounting plate is the same regardless of the handedness.
1. Moving the electrical heating coil:
The electrical heating coil must always be between the heat recovery and supply air fan.
- Detach the heating coil cabel. It is connected with a bayonet socket.
- Unscrew the two fixing screws (crosshead).
- Fasten the heating coil with screws to the supply air fan fixing plate.
- Attach the heating coil cabel.
2. Turning the heat exchanger:
In the back of the heat exchanger is a fixed by-pass channel that always must be on the
outside air / supply air side.
The by-pass channel is opened by turning the by-pass damper preventing the outside air
from flowing through the heat exchanger.
The by-pass channel is shut with the by-pass damper allowing the outside air to flow
through the heat exchanger.
- Remove the by-pass damper from the outside air surface of the heat exchanger.
- Pull the heat exchanger out of the unit.
- Turn the heat exchanger 90° (1/4 lap) and push it back into the unit.
- Put the by-pass damper back in its new place.