Enertech Global, LLC
20
WS Rev. E Models
Installation and Operations Manual
Contents of the Desuperheater Fitting Kit
•
(1) p/n 20D052-01NN, Installation Instructions
•
(1) p/n 33P211-01BN, 3/4”x 3/4”x 3/4” FPT Brass Tee
•
(1) p/n 33P210-01NN, ¾” Boiler Drain Valve
•
(1) p/n 11080005001, ¾” MPT x 3-1/2” Brass Nipple
•
(3) p/n 11080006001, ½” SWT x ¾” MPT Copper Adaptor
•
(1) p/n 11080007001, ¾” x ¾” x ½” SWT Copper Tee
Connection to Hot
Water Tank
Brass Tee
Adapter to Unit
Water Line
Drain
Copper Tee
For Domestic
Cold Water In
Line
⚠
WARNING
⚠
TO AVOID SERIOUS INJURY, IT IS RECOMMENDED
THAT AN ANTI-SCALD MIXING VALVE IS INSTALLED
ON THE HOT WATER SUPPLY LINE INTO THE HOME.
EVEN THOUGH HOT WATER HOT WATER TANK
TEMPERATURES COULD APPEAR TO BE SET AT
LOWER LEVELS, HIGH TEMPERATURE WATER FROM
THE DESUPERHATER COULD RAISE TANK
TEMPERATURES.
Water Heater Connection Kit Assembly for Bottom of Water Heater
Note:
Drawing shown vertically for detail. Fitting installs horizontally
into hot water tank.
Section 7: Desuperheater Installation