19
06. INSTRUCTIONS PUMP TYPE RSA 95 & 125
Technical data
RSA 95
RSA 125
Viscosity range:
1,3-18,0 mm
2
/s
Pressure range at viscosity 1,3-1,8:
5,5-12,0 bar
Pressure range at viscosity 1,8-18,0:
2,5-21,0 bar
Oil temperature:
-10 to+70°C
Nozzle capacity at viscosity 4,3:
150-190 l/h
215-260 l/h
Gearwheel capacity:
225 l/h
294 l/h
Max pressure on suction- and return side:
4 bar
Components
1. Pressure gauge port G 1/8"
2. Nozzle port G 1/4"
3. Suction line G 1/4"
4. Suction line G 1/4"
5. Return line G 1/4"
6. Return line G 1/4"
7. By-pass plug
8. Pressure adjustment, 4 mm Allen key
Mounting/dismounting by-pass plug
In a 2-pipe-system excess oil is led back direct to the oil tank. In a 1-pipe-
system the by-pass plug must be removed so that there is a free passage
back to the suction side through the return line with the return port closed.
(Pos.7).
Purging
On 1-pipe systems it is necessary to purge the pump. On 2-pipe systems
purging is automatic through the return line.
Replacing the filter
Replace the oil fiter on the oil pump as follows.
- Close the oil valves.
- Unscrew the cover (4 x 5 mm Allen screws).
- Replace the oil filter.
- Replace the cover gasket.
- Refit the cover.
- Open the oil valves.
171 805 08 04-01
5
8
1
7
2
3
4
6
Содержание Bentone B55 Series
