EnerSys Alpha FXM HP 1100, Техническое руководство

Страница: 83 / 150

0170022-J0 Rev A Page 71
9.3 Creating a FXM HP System Manually
On a controller, if there is no FXM HP system defined, you can easily create the inventory items needed
to monitor and control a FXM HP system. There are three steps to creating a new FXM HP system.
1. Create the FXM HP system and other inventory items, and then configure the inventory to use
the inputs and relays to monitor the system.
2. Configure each of the system function to correctly control the FXM HP system and manage the
battery.
3. Adjust threshold, enable/disable alarm and set up any remote alarm reporting using alarm relays
and/or SNMP notification.
9.3.1 Quick Reference for Configuring a FXM HP System
The following figure shows the key configuration settings for a FXM HP system that should be set or
checked so that the system operates correctly.
There are many optional and alarm reporting settings that can also be configured.