Enerpac VEP-1, Инструкция

Страница: 2 / 3

2
4.0 INSTALLATION
1. Disassemble the plug. See figure 2.
2. Strip wire insulation 1/4” back. Insert wires through plug body.
Insert wires into terminals and secure with screws. Check
figure 2 for A.C. and D.C. plug wiring.
VEP-1 Standard Plug – Non-rectified
250 V Max Black
VEP-2 Rectified Plug – 220 V Max.
*
Black
VEP-3 Standard Plug 24 volts D.C.
– Lighted Black
VEP-4 Standard Plug 1115 volts D.C.
– Lighted Grey
VEP-5 Rectified Plug 24 volts
– Lighted
*
Black
VEP-6 Rectified Plug 115 volts
– Lighted
*
Grey
* Rectifier plugs used when power source is A.C. voltage.
Plug will rectify A.C. voltage to D.C. to allow valve to shift.
Selection Chart
Model Number Description Color
Figure 1, Valve Plugs
Figure 2
VEP-1
ALL OTHERS