Enerpac ECCE32, Инструкция

Страница: 9 / 24

9
8.2 Opening and Closing the Safety Guard
The safety guard contains a U-shaped handle at the
hinged end. Use this handle to open and close the guard.
A spring-loaded latch pin secures the guard when it is in
the fully closed position. See Figures 3 and 4.
To open the safety guard:
1. Be sure that the cutter is off.
2. Pull the latch pin knob in the direction shown.
3. Open the safety guard.
3
2
1
Figure 3, Opening the Safety Guard
To close the safety guard:
1. Be sure that the cutter is off.
2. Move the safety guard to the fully closed position. Be
certain that it is secured by the latch pin.
Figure 4, Closing the Safety Guard
1
8.3 Directional Lever
The directional lever is located on the left side of the
tool. The lever position determines the piston direction
of travel when the cutter is operated. See Figure 5.
• Position 1: Piston advances and moving blade slides
forward.
• Position 2: Piston retracts and moving blade slides
rearward.
1
2
Key:
1. Advance
2. Retract
Figure 5, Directional Lever Positions
8.4 Trigger On-Off Switch
NOTICE:
WARNING
To prevent serious personal injury, be
certain that hands, fingers and other body parts are
away from the cutting area before depressing the
cutter trigger.
A trigger mounted in the cutter grip controls cutter
operation. Pressing the trigger automatically starts the
cutter electric motor. See Figure 6.
• With the directional lever in position 1, press and hold
the trigger to advance the piston and slide the moving
blade forward. See Figure 7.
• With the directional lever in position 2, press and hold
the trigger to retract the piston and slide the moving
blade rearward. See Figure 8.
• Release the trigger at any time to stop the piston and
moving blade. Be advised that there may be a brief
delay until the piston comes to a complete stop.
• The piston will stop moving when it has reached
either its minimum or maximum extension. To prevent
possible damage to the cutter, do not continue to
press the trigger after the cylinder is fully retracted or
extended.
Key:
1. Handle
2. Safety Guard
3. Latch Pin Knob
Key:
1. Latch Pin