Installation Manual
Welcome to use HC-22BD infrared presence sensor!
The product adopts good sensitivity detector and integrated circuit. It gathers automatism, convenience, safety,
saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source and it can start
the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used
widely.
SPECIFICATION:
Power Source: 220-240V/AC Detection angle: 360
°
Power Frequency: 50Hz Detection Range: 50%, 75%, 100% (choice)
Daylight sensor: <3-2000LUX (adjustable) Detection Distance: 20m max(<24
℃
)
Hold Time: Min.10sec
±
3sec Working Temperature: -20~+40
℃
Max.30min
±
2min Working Humidity: <93%RH
Rated Load: Max.2000W Detection Moving Speed: 0.6-1.5m/s
1000W Power Consumption: approx 0.5W
Installation Height: 2.2-6m
FUNCTION:
Can identify day and night: The consumer can adjust working state in different ambient light. It can work in the
daytime and at night when it is adjusted on the
“2000LUX”. It can work in the ambient light less than 3LUX, when it
is adjusted on the “3LUX”.
Detection range adjustable: It offers 3 levels (50%, 75%, 100%).The max can be 20m.
Time-Delay is added continually: When it receives the second induction signals within the first induction, it will
restart to time from the moment.
Good sensitivity Poor sensitivity
INSTALLATION ADVICE:
As the detector responds to changes in temperature, avoid the following situations:
Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors etc.
Avoid mounting the detector near heat sources, such as heating vents, air conditioning units, light etc.
Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall plants etc.
