AA
Classification:
Rechargeable
Chemical System:
Nickel-Metal Hydride (NiMH)
Designation:
ANSI-1.2H2
Nominal Voltage:
1.2 Volts
Rated Capacity:
1600 mAh* at 21°C (70°F)
Typical Weight:
28.0 grams (1.0 oz.)
Typical Volume:
8.3 cubic centimeters (0.5 cubic inch)
Terminals:
Flat Contact
Jacket:
Plastic
* Based on 320 mA (0.2C rate) continuous discharge to 1.0 volts.
0ºC to 40ºC (32ºF to 104ºF)
0ºC to 50ºC (32ºF to 122ºF)
Storage: -20ºC to 30ºC (-4ºF to 86ºF)
Humidity: 65±20%
guidelines regarding environmental conditions:
(charged cell)
1000
12
Above values based on AC current set at 1.0 ampere.
Internal Resistance:
The internal resistance of the cell varies with state of charge, as follows:
30 milliohms
40 milliohms
Operating and Storage Temperatures:
To maintain maximum performance, observe the following general
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Industry Standard Dimensions
Discharge Characteristics
ENERGIZER NH15-1600
Specifications
mm (inches)
Cell Charged
Cell 1/2 Discharged
Value tolerances are ±20%.
(tolerance of ±20% applies to above values)
AC Impedance (no load):
The impedance of the charged cell varies with frequency, as follows:
Frequency (Hz)
This data sheet contains typical information specific to products manufactured at the time of its publication.
Important Notice
Charge:
Discharge:
NOTE: Operating at extreme temperatures, will significantly
impact battery cycle life.
Impedance (milliohms)
0.9
1.0
1.1
1.2
1.3
1.4
0.0
0.5
1.0
1.5
2.0
2.5
C
ell Vo
lta
ge
Hours of Discharge
800 mA
(0.5C)
3200 mA
(2.0C)
1600 mA
(1.0C)
PRODUCT DATASHEET
0.9
1.0
1.1
1.2
1.3
1.4
0
3
6
9
12
C
ell Vo
lta
ge
Hours of Discharge
Typical Performance at 21ºC (70ºF)
160 mA
(0.1C)
320 mA
(0.2C)
1-800-383-7323 USA/CAN
www.energizer.com
14.50 (0.571)
13.50 (0.531)
5.50 (0.217)
Maximum
1.00 (0.039)
Minimum
50.50 (1.988)
49.20 (1.937)
7.00 (0.276)
Minimum
Form No. EBC - 7102M
Page 1 of 1
