background image

TM

M

T

3 / 5 / 6 / 6.5 / 7 / 7.5���� �� ��

���� �� �� 

���-to-��� Power �dapter

 

273-333

Cautions:

• 

If this adapter is not compatible with the voltage and 

current requirements of your portable device, it can result 

in PERMANENT DAMAGE to the device.

• 

Before using, consult the User’s Guide or the rating label 

on your device to make sure it requires 3 / 5 / 6 / 6.5 / 7 or 

7.5 volts DC.

•  

The power adapter’s current (2A) must be equal to or more 

than the current needed by your portable device.

•  

Before charging cell phones, make sure the cell phone 

specifications are supported by this power adapter.

•  

Never operate the adapter if it has been damaged in any 

way. Do not disassemble it.

w

WARNING: 

To prevent fire or shock hazard, do not expose 

the adapter to rain or other moisture.

CAUTION:

 The total combined current for accessories 

plugged into this adapter must not exceed 2A.

FCC Information

This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equip�

ment does cause harmful interference to radio or television reception, which can 

be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that 

may cause undesired operation.
Modifying or tampering with your 3 / 5 / 6 / 6.5 / 7 / 7.5VDC 2A AC�to�DC Power

 3 / 5 / 6 / 6.5 / 7 / 7.5VDC 2A AC�to�DC Power

VDC 2A AC�to�DC Power 

Adapter’s internal components can cause a malfunction, which might invalidate 

its warranty and void your FCC authorization to operate it.

Limited Warranty

Ignition L.P. warrants this product against defects in materials and workmanship 

under normal use by the original purchaser for ninety 

(90) days

 after the date of 

purchase.  IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attributable 

to abuse, misuse, failure to follow instructions, improper installation or mainte�

nance, alteration, accident, Acts of God (such as floods or lightning), or excess 

voltage or current; (b) improper or incorrectly performed repairs by persons who 

are not a Ignition L.P. Authorized Service Facility; (c) consumables such as fuses 

or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, 

shipping or insurance costs; (f) costs of product removal, installation, set�up 

service, adjustment or reinstallation; and (g) claims by persons other than the 

original purchaser.
Should a problem occur that is covered by this warranty, take the product and 

the sales receipt as proof of purchase date to the place of purchase.  Ignition 

L.P. will, at its option, unless otherwise provided by law: (a) repair the product 

without charge for parts and labor; (b) replace the product with the same or a 

comparable product; or (c) refund the purchase price. All replaced parts and prod�

ucts, and products on which a refund is made, become the property of Ignition 

L.P.  New or reconditioned parts and products may be used in the performance 

of warranty service.  Repaired or replaced parts and products are warranted for 

the remainder of the original warranty period.  You will be charged for repair or 

replacement of the product made after the expiration of the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS 

NOT STATED IN THIS LIMITED WARRANTY.  ANY IMPLIED WARRANTIES 

THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY 

OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF 

FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION 

OF THE STATED WARRANTY PERIOD. 
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY 

OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY 

OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR 

DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE 

OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, 

INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM 

INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR 

PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL 

DAMAGES, EVEN IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY 

OF SUCH DAMAGES.
Some States do not allow limitations on how long an implied warranty lasts or 

the exclusion or limitation of incidental or consequential damages, so the above 

limitations or exclusions may not apply to you.  This warranty gives you specific 

legal rights, and you may also have other rights which vary from State to State. 

You may contact Ignition L.P. at:   

Ignition L.P., 3102 Maple Ave Suite 450, Dallas, TX 75201  

           02/09

For product support, call 

1-866-315-0426.

UsingYour Adapter

1.

  Plug the correct 

size Adaptaplug 

onto the jack at the 

end of the adapter’s 

cord. 

• 

If your device’s DC input jack is marked 

 

, align 

TIP

 on the adapter’s jack with 

+

 on 

the Adaptaplug (shown). 

• 

If the DC input jack is marked 

, align 

TIP

 on 

the adapter’s jack with 

 on the Adaptaplug.

 

w

CAUTION:

 Be sure to set the correct tip polarity. 

Incorrect polarity can damage your device or the 

adapter.

2.

   Plug the Adaptaplug into your device’s DC input jack.

3.

  Set the adapter’s voltage switch to the correct setting.

4.

  Plug the AC adapter into an easily accessible power 

outlet located near the equipment.

Protect the environment. Go to E�CyclingCentral.com  

to find an electronic recycling center near you.

Printed 

in China

05A09

273�333

© 2009. Ignition L.P. All rights reserved.  

Enercell is a trademark used by Ignition L.P.

Отзывы: