AK-23 Quick Installation Guide (EN)
DIMENSION
(Unit: mm)
SPECIFICATION
PARTS SUPPLIED
INSTALLATION
Ceiling Mount
PRIOR to USE
Install the mount onto a strong structure such as concrete wall
Use the supplied accessories when installing the mount bracket depends on mounting position
Construction:
Aluminum Cast
Environment:
Ceiling or Wall Mount
matching with a bracket
Dimension
(mm):
ф
113.5x62.0 mm
Weight: 269g (0.53lb)
Junction Box
3 x Screws PM4*18
Stopper for Wire
Screw for Safety Belt
QJG
1.
Locate at the installation position and drill the wall.
2.
Hammer the 4 expansion screws into the wall holes drilled
3.
Route the power and BNC cable through the Pipe
4.
Tight the pipe to wall through the four screws
5.
Screw the box into the Pipe, the Pipe can match with AK23 or AK 25 Box etc
6.
Insert the box ring for waterproofing
7.
Open the dome cover by loosening screws, The cover should be connected by a Safety Belt
8.
Connect the power and BNC cable with the camera cables
9.
Fixed the Vandal-Proof Dome base to the Junction box
10.
Set the camera’s viewing angle
11.
Put the dome cover to the dome unit and tighten screws.
Содержание AK-23
Страница 4: ...AK 23 Quick Installation Guide EN...
