Eneo 230114, Быстрое руководство по установке

Страница: 11 / 16

8
3.2.2 Desktop Installation
This series switch supports desktop installation. Users can put this product on clean,
stable, grounded workbench. The installation steps are as below:

Carefully put the device upside down, clean the grooves on the chassis backplane
with soft cloth to make sure there is no oil or dust in it.

Remove the stickers on the foot pad, paste the foot pad in backplane groove.

Carefully put the device upright on the workbench.
3.2.3 Wall Mount
This series switch supports wall-mounted installation. Users can put the switch on clean,
steady vertical wall. Installation steps are as below:
Step 1 Fix the hangers to the switch. Accessories
Step 2 Drill 4 holes on the wall where device is installed,
then drive the rubber plug into the hole. Drive these
screws into the hole for the rack and fix the product by
aiming at the rubber plug.
Accessories
4*