Package
Quick
Installation
Guide
EPoC Extender
(Transmitter / Receiver)
Bracket
& Screw
Quick Installation
Guide
Hardware Overview
Right
Left
56V DC
Bracket
NO ANALOG
CAMERA
ETHERNET
PoE-ON
Data-Link
Join-Link
Power
PoE
Bracket
Join
ON OFF
브라켓 홀
브라켓 홀
RJ45
Join 버튼
상태 표시등
DC 전원 어댑터
PoE ON/OFF 스위치
(ECP-2601T 전용)
PoE-ON (ECP-2601T)
PD-AUX (ECP-2601R)
Bracket Hole
DC Power Jack
Bracket Hole
Join Button
Status LED Indicator
PoE ON/OFF Switch
(Transmitter model only)
PoE-ON
(Transmitter model only)
PD-AUX
(Receiver model only)
Overview
EPoC Extender is a High-Speed, long distance Ethernet & PoE extender that
makes possible to transmit the Ethernet signal up to 2.4Km and PoE up to
1.2Km via Coax (or UTP, 2wire & Etc.) cables in different situations.
It is cost-effective and time saving solution to migrate existing analog system
to IP based system since EPoC Extender supports easy installation utilizing
the existing cable.
With long distance transmission feature, the device makes to overcome 100
meters distance limitation easily and reduces the construction cost
significantly compared with fiber optic configuration.
Features
Ethernet over Coax communication following IEEE1901 Standard
Data + Power over Coax cable (or UTP, 2-Wire)
Data distance up to 2.4Km
PoE distance up to 1.2Km
Max. 95Mbps Bandwidth
10/100 Full Duplex
128bit AES network encryption
Supports Multi-connection (Daisy chain, Star, etc.)
PoE, PoE+, Extra PoE (Max. 60W output) - Transmitter model only
Supports UTP, Telephone (2 Pairs), 2-Wire cable communication
(Using BTE Series)
LED Indication (PoE, Data, Join, Power)
Plug & Play
Surge Protection
Support PoE+ Input (25.5W) from PSE devices (PoE Switch or Injector)
– Receiver model only
Slim design
Quick Installation Guide
Ethernet Coax Transmitter/Receiver,
Data & Power over Coax,
1 x RJ-45, 1 x BNC
IAM-6MC1001MTA
IAM-6MC1001MRA
Please read carefully the instruction manual before use. Depending
on the model, the image and the actual look of the product may vary.
LED Indicators
Indicator
Color
Function
PoE-ON
PoE Output Status
(Transmitter model only)
PD-AUX
PoE Input Status
(Receiver model only)
Data-Link
Blinks when transmitting Ethernet data
Join-Link
EPoC products connected
Power
56VDC or PoE Input connected
Installation Guide
1. Set the IP address on the camera following the instruction manual
of the camera.
Î
If the camera IP is automatically assigned (DHCP, etc.), there is no
need to set the camera IP separately.
2. Connect BNC of the coaxial cable to each
Transmitter/Receiver
.
3. Connect 56V DC power to
Transmitter/Receiver
first and then to
AC outlet.
Î
Receiver
can be powered by PoE Switch Device (PoE+ PD
Supported) but for safe working, it recommeded to use 56VDC
Power supply on
Receiver
. When using both PoE switch Device and
power supply at the same time, power supply works preferentially.
Î
In case of 7W camera, the device supports long distance PoE
transmission up to 1,200m over RG6 coaxial cable.
PoE transmission distance can be varied depending on cable type
and Camera’s power consumption(W).
Î
Please download full manual for more information about PoE
distance by various cables.
4. When they are connected without any problem, Power / Join Link
LED are on.
5. Adhere the brackets in the package to
Transmitter/Receiver
and
then fix up the products.
6. Connect the UTP(LAN) cable between
Receiver
and NVR first and
then between
Transmitter
and camera.
7. Turn on the PoE switch on
Transmitter
for PoE IP camera and if the
camera is powered by a separate power source (not powered by
PoE output feature of the
Transmitter
), turn off the PoE switch on
Transmitter
.
Î
Both
Transmitter/Receiver
send data and power together via BNC
connector.
Receiver
does not have PoE support so that it can send
data only via RJ45.
8. Ping test is recommended to confirm the whole network after
installation.
9. Check the video signal on the monitor.