Enelion Wallbox Adspace, Инструкция по сборке

Страница: 15 / 22

Wallbox Adspace - Assembly manual 8 - 2021
Fig. 20: PilotBox RCM B socket.
2. Pass through the RCM B hole four powering ca-
bles (All three phases and neutral cord.)
Fig. 21: RCM B connection
­
HINT
The way of cables through the RCMB hole does
not matter. The RCMB monitor could be freely
assembled on the socket cables or on the main
income cables.
Ÿ
INFO
More information in the User Manual.
5.2. Connection of communication wires
­
HINT
Both integrated charge controllers in Enelion
Wallbox Adspace are connected by a commu-
nication cable as a default. In the implementa-
tion of the Enelion Chain network, this section
should be treated as a section between devices
and all the guidelines described below should
be applied.
5.3. Enelion Chain
If the communication between the devices is expected
to be via Enelion Chain network, the cables should
be connected to the charge controller. Two cores of
the communication cable and the screen grounding are
used for communication. To connect correctly:
1. Prepare communication cables
2. (a) for devices at the beginning of the network,
select a pair of communication wires,
(b) for devices in a section of the network, pre-
pare the communication cables inserted into
the device by connecting together the cores
of the incoming and outgoing wires (in vari-
ant A) or move to the next step (in variant B,
check figures below).
Fig. 22: Incoming and outgoing communi-
cation cable connection (variant A)
14 Connection