G
F
A
B
C
H
E
J
I
K
D
Information For Installing TWC2M-MB
Mounting Bracket For Endura
TWC2M Rapid Charger
Reference
Quantity
Description
Installation Notes
A
1
Bracket
Attach charger to this part. Use for mounting charger to a
dash or vertical surface.
B
2
Tie-down straps
Factory installed on bracket for each charging position.
C
4
Brass screws
Use to fasten charger to main bracket.
D
4
Wood screws (3/4” length)
Used to attach bracket to dash or vertical surface.
E
4
Machine screws (1/2” length)
Use to fasten bracket to RAM-B-101U for floor mounting
(RAM-B-101U sold separately).
E
4
Hex nuts
E
4
Lock washers
F
--
Retaining clip
Allows length of tie-down strap to be adjusted.
G
--
Opening for dash mounting
Use wood screws (D) to secure the main bracket at four
points.
H
--
Tie-down strap hook
Connection point at front of bracket for tie-down straps.
I
--
Charger connection point for
positioning front charging slot to
the left
Use brass screws (C) to fasten charger to bracket. Insert
screw from underside of bracket at four points.
J
--
Charger connection point for
positioning front charging slot to
the right
K
--
Connection point for RAM-B-101U
mount
Use 4 machine screws, lock washers, and hex nuts to fas-
ten charger bracket to RAM-B-101U.
Overview –
TWC2M-MB is designed for mounting TWC2M in a vehicle. Listed below are the parts included or
bracket features.
ENDURA
™
Chargers By Power Products • www.powerproducts.com • Toll Free
800-529-1618
• PPU-12
