Endura Trilennium Скачать руководство пользователя страница 1

Страница: 1 / 3

There are two types of snap rings used:

• Older sets will have an U-Shaped Snap Ring
• Newer sets will feature a Circular Snap Ring with

Tabs

For the U-Shaped Snap Ring:
• Carefully remove the snap ring (U-Shaped locking

pin) with a flat head screwdriver.

• Lift the spring retaining plate out of place (Careful,

spring may jump out of place).

For the Circular Snap Ring with Tabs:
•

Open the ring using the Snap Ring Pliers.

• Remove the Snap Ring and lift the spring retaining

plate out of place (Careful, spring may jump out of

place).

1. Remove the Snap Ring and Retaining Plate.

2. Remove the Spring and Bushing

•

Remove the old spring.

• Remove the old bushing by pushing it out of the

front of the escutcheon.

3. Insert New Bushing

Insert new bushing into escutcheon. Note the

orientation, the indention on the bushing should be

opposite the extruded stop on the escutcheon.

Trilennium

Bushing Replacemet Kit

Installation Instructions

Stop

Indentation

Insert

Pliers
here

U-SHAPED SNAP RING

CIRCULAR SNAP RING WITH TABS

Содержание Trilennium

Страница 1: ...Ring Pliers Remove the Snap Ring and lift the spring retaining plate out of place Careful spring may jump out of place 1 Remove the Snap Ring and Retaining Plate 2 Remove the Spring and Bushing Remove...

Страница 2: ...and seat it against the mounting screw pass through 4 Check for Proper Orientation of Bushing 5 Insert New Spring Indentations Mounting Screw Pass through Mounting Screw Pass through Align the spring...

Страница 3: ...er firmly push it into place For the Circular tabbed snap ring Using snap ring pliers spread the ring slightly so it will go over the bushing Move it downward to the groove location and release it Be...