e n d u r a
®
ENDURA
®
GREASE INTERCEPTOR
RECESS EXTENSION
RISER INSTALLATION P/N 3935AX6, 3920AX6
Components
Equipment Required
3 - 1/2" Sch 40 pipe
Silicone Sealant
Level
3 - 1/2" Sch 40 couplings
Hammer
Screwdriver
2 - L Shaped extension components
Pliers
Saw
11 - 1 1/4" screws
Nail Punch
Pencil
Preparing the Endura Tank to Accommodate the Extension
Disengage the Quick Connect latches and remove the lid from the tank.
With a hammer and a punch,
disengage the dowel pin from the tank.
Using a pair of pliers, remove the
dowel pin. Repeat this procedure for all
of the pins housed in the tank.
1
Insert the tank into the excavated hole
and locate the pipe connections to the
desired height.
2
Level the tank into its final position and
secure to the piping.
3
