Endress ESE Series, Перевод инструкции по эксплуатации, Страница: 102 / 452

40
Maintenance
Tab. 9-1 Generator maintenance plan
9.2 Maintenance work
Only authorised specialist personnel are allowed to carry out maintenance
tasks. Execute all of the maintenance steps in the maintenance schedule
according to the following instructions.
CAUTION!
Certain surfaces on the device can get very hot whilst it is running.
Risk of burns
► Never touch any engine parts (in particular the exhaust system) for a few min-
utes after ceasing operation.
► Always leave hot engine parts to cool down before touching them.
NOTICE!
Also always read about the checking and maintenance work which con-
cerns the electrical safety of the generators in the chapter “Checking the
electrical safety“.
Disconnect the negative pole of the starter battery in order prevent unin-
tentional restarting of the engine whilst working on it (see Chapter 9.6.2).
Exhaust system
Check for leaktightness, fas-
ten, if necessary, change seals
X
Check the spark screen, clean;
change when necessary
X
Carburettor Check the choke function X
Cable pull starter
Check the cable pull and func-
tion
X
Fastening and thread-
ed joints Check for a fixed hold and
damage; replace if necessary
X
Maintenance work Maintenance interval according to time
or operating hours [h]
Item Maintenance step Every 8
h /daily
every 3
months
or 25h
every 6
months
or 50h
annual-
ly every
100 h
Maintenance work should be performed by your service partner.
EN