Using special fittings / accessories
Status at: October 2018
ESE 604 DHG (ES) DIN
55
1.
Plug in the device and switch on.
The displayed symbol
(see Fig. 4-6-(9))
and the position of
the circuit breaker indicate the result:
Symbol
Significance
lights up red
Insulation fault (≤ 23 kΩ)
Yellow
Insulation fault (≤ 34.5 kΩ)
stays off
Connected unit is OK
Table 5.5: Insulation monitoring whilst running without switching off
If an insulation fault exists and the unit was previously OK
when tested without a device connected (see above), the
insulation fault has been caused by the device.
2.
After the device has been switched off and unplugged,
the circuit breaker must be returned to Pos. 1, and the
generator must be restarted, in order for the device to be
operated again.
Insulation monitoring
whilst running:
Содержание ESE 604 DHG DIN
