Endress+Hauser Waterpilot FMX21, Руководство по эксплуатации

Страница: 40 / 144

Integrating device via HART ® protocol
Waterpilot FMX21
40 Hauser
8 Integrating device via HART ® protocol
Version data for the device
• Firmware version: 01.00.zz
• On the title page of the Operating Instructions
• On the nameplate
• Firmware Version parameter: Diagnosis → Instrument info → Firmware Version
• Manufacturer ID: 17 (0x11)
Manufacturer ID parameter: Diagnosis → Instrument info → Manufacturer ID
• Device type code: 36 (0x24)
Device ID parameter: Diagnosis → Instrument info → Device ID
• HART protocol revision: 6.0
---
• Device revision: 1
• On the nameplate
• Device revision parameter: Diagnosis → Instrument info → Device revision
The suitable device description file (DD) for the individual operating tools is listed in the
table below, along with information on where the file can be acquired.
Operating tools
• FieldCare
• www.endress.com → Download area
• CD–ROM (contact Hauser)
• DVD (contact Hauser)
• AMS Device Manager (Emerson Process Management)
www.endress.com → Download area
• SIMATIC PDM (Siemens)
www.endress.com → Download area
• Field Communicator 375, 475 (Emerson Process Management)
Use update function of handheld terminal
8.1 HART process variables and measured values
The following numbers are assigned to the process variables in the factory:
Process variable Pressure Level
Linear Table active
First process variable
(Primary variable)
0
(Pressure measured)
8
(Level before
linearization)
9
(Tank content)
Second process variable
(Secondary variable)
2
(Corrected press.)
0
(Pressure measured)
8
(Level before
linearization)
Third process variable
(Tertiary variable)
3
(Sensor pressure)
2
(Corrected press.)
0
(Pressure measured)
Fourth process variable
(Quaternary variable)
4
(Sensor temp.)
The assignment of the device variables to the process variable is displayed in the
Expert → Communication → HART output menu.
The assignment of the device variables to the process variable (SV, TV, QV) can be
changed using HART command 51.
An overview of the possible device variables can be found in the following section.