Endress+Hauser Waterpilot FMX11, Руководство по эксплуатации

Страница: 10 / 28

Incoming acceptance and product identification Waterpilot FMX11
10 Hauser
• Is the order code on the delivery note (1) identical to the order code on the product
sticker (2)?
• Do the data on the nameplate correspond to the order specifications and the delivery
note?
• Is the documentation provided?
• Are the goods undamaged?
If one of these conditions is not satisfied, contact the Hauser Sales Center.
4.2 Product identification
The following options are available for the identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter serial number from nameplates in W@M Device Viewer
( www.endress.com/deviceviewer ): all the information about the measuring device is
displayed.
For an overview of the technical documentation provided, enter the serial number from
the nameplates in W@M Device Viewer ( www.endress.com/deviceviewer )
4.2.1 Nameplates
Nameplates on extension cable
Dat./Insp.:
FW.Ver.:
Dev.Rev.:
Cal./Adj.
Mat:
L=
Ser. no.:
Ext. order code:
Waterpilot FMX11
Made in Germany, D-79689 Maulburg
p
2
17
16
15
14
3
5
8 11 12
13
A0040852
2 Extended order number (complete)
3 Serial number (for clear identification)
5 FMX11 connection diagram
8 Length of extension cable
11 Materials in contact with process
12 Test date (optional)
13 Software version/device version
14 Supply voltage
15 Output signal
16 Set measuring range
17 Nominal measuring range
4.3 Storage and transport
4.3.1 Storage conditions
Use original packaging.
Store the measuring device in clean and dry conditions and protect from damage caused by
shocks (EN 837-2).