Endress+Hauser TopClean S CPC 30, Руководство по эксплуатации

Страница: 89 / 146

TopClean S CPC 30 6 Commissioning
Hauser 89
Calibration
redox relative "Calibration relative"
For calibration, two tanks are filled with a sample of the medium. The contents of the first
tank are detoxified and called calibration solution 1.
The contents of the second tank are left unchanged and are called calibration
solution 2.
CODE CHOICE
(default = bold) INFO
(E1, 2 = Editor types, s. page 28)
User
settings
CC Calibration with
abs. calibration Note in display
Display of the type of on-site calibration selected in the
calibration settings.
–
CCD1 / CCD4 Immerse:
Electrode in buffer 1 Handling instructions
Immerse the electrode in buffer 1 / 2 (detoxified
sample, see above) and then press "E".
–
CCD2 / CCD5 20 %
(0 ... 30 %)
Enter buffer
Enter the relative redox value of buffer 1 / 2 (detoxified
sample) in percent.
E2
CCD3 / CCD6 Time: 10 s
mV 1:
225
Checks the stability of the calibration
Wait until the measurement is stable:
Time does not count down,
mV value no longer flashes,
Display "Measured value stable"
Then press "E".
–
CCD7 Invalid calibration value Note in display:
Error message if the offset is too large.
–
CCD8 Accept
Reject
Recalibrate
End of calibration
Accept: Pressing "E" accepts the new calibration data.
Reject: The data is not accepted, a recalibration won’t
be started.
Recalibrate: The data is rejected and a new calibration
will be started.
E1
CCD9 Electrode in medium? Note in display:
If the electrode is back in the medium, so that
measurement can take place?
–