Endress+Hauser TOCII CA72TOC, Руководство по эксплуатации

Страница: 30 / 140

Operation TOCII CA72TOC
30 Hauser
5.3 Operation during measuring mode
The analyzer has three operating modes:
• Measuring mode
• Service mode
• Programming mode
The measuring mode is fully automated. Manual intervention on the part of the user is not possible.
a0012443
Fig. 11: Display during measuring operation
1 Time
2 Load curve of the past 6 hours
3 Timeframe
4 Measured value
5 Measured value of the IR detector
5.3.1 Recording mode
Pressing the
U
key during measuring operation takes you to the recording mode. Using the arrow
keys, scroll between the measured values recorded:
•
V
1 day earlier
•
W
1 day later
•
U
2 hours earlier
•
T
2 hours later
Once you have selected the required period, press the Enter key.
Recording period
• 14 days for one-channel operation
• 7 days for two-channel operation
5.3.2 Spot view
The spot view is activated in the recording mode by pressing the Enter key.
The following information is displayed:
• Load curve
• Measured value
• Date
• Time
A small cursor on the display indicates where you are currently in the load curve.
TOC
mg/l
IR = 334 ppm
234
5 00 6 00 7 00
8
00 9 00 10
00 11
00
1000
500
11:39:04
1
2
3
4 5