Endress+Hauser TOC Analyzer CA78, Руководство по эксплуатации

Страница: 30 / 48

Commissioning TOC Analyzer CA78
30 Hauser
autostart by pressing the Deactivate autostart key, the interrupted measurement is
restarted.
A0046966
 19 Autostart window
Deactivating/activating autostart
1. Open the Settings menu.
2. Select the Options 2 tab.
3. Activate/deactivate autostart via the Continue after error setting →  27.
In conjunction with the trigger, the system only starts the measurement if the
corresponding input signal is also present.
8.3.7 Shutdown procedure
1. Open the main menu.
A0046941
 20 Main menu
2. Press the Quit key.
 A window for authorization is displayed. The following steps must be performed
for the switch-off procedure (only possible with the service ID).
3. Enter the four-digit ID (2199).
4. Press OK in the Login window.
5. Enter the four-digit PIN (9708).