Endress+Hauser TOC Analyzer CA78, Руководство по эксплуатации

Страница: 22 / 48

Commissioning TOC Analyzer CA78
22 Hauser
Error during sampling
This warning message can only appear with the order option Detection inlet pressure
sample . If this message is displayed, the sensor has detected a closed input.
‣
Check that medium is correctly supplied to the device.
8.3.2 Viewer
This menu allows you to view all the TOC measured values. The data are selected and
displayed by selecting the date.
A0046962
 10 Viewer menu
You can select the data as follows:
1. Make the desired preselection (e.g.: Online ).
2. Select the date of interest under Selected date .
3. Select the file under Selected data file .
 The selected information is shown in the chart on the right-hand side.
The user can use the Chart or Table tabs to switch between displaying the
information in a chart or table.
The history file is an ongoing list that acts as logbook and contains all the information
about logins, errors and calibration results (successful/not successful).
In addition, you can export and print out data via this menu (if a printer is installed under
WINDOWS®).
8.3.3 Qualification
You can select the following two functions via this menu:
• Calibration
• SST (system suitability test)
The selection is made via the drop-down menu.
Various notifications and prompts guide you through the individual functions.