manualshive.com logo in svg

Endress+Hauser Teqwave T, Руководство по эксплуатации, Страница: 14 / 54

Поделиться
Скачать
Endress+Hauser Teqwave T Скачать руководство пользователя страница 14

Electrical connection

Teqwave T

14

Hauser

6.2.2

Connecting the USB cables

Spread of malicious software

The computer recognizes the transmitter as a mass storage medium. Because of this, mal-

ware that may be on the computer can potentially spread.

‣

Ensure suitable security measures are taken, such as the use of anti-virus software.

The USB port of the measuring device is used for the following: 

• To charge the battery via the computer or USB charger

• To transmit data to the computer

• To establish the connection to the "Teqwave Mobile Viewer" operating tool

If connecting to the USB charger: use the USB charger supplied with the device. If using 

third-party products: ensure compliance with the charger specifications 

→ 

13.

If connecting to the computer: the measuring device cannot perform any measurements 

during this time.

Connecting the USB cable

‣

Connect the measuring device with the computer (switched on) or the USB charger via 

the USB cable.

 The battery symbol flashes while the measuring device is charging.

 If the device is connected to the computer, the computer recognizes the measuring 

device as a mass storage medium.

 Possible to connect to the "Teqwave Mobile Viewer" operating tool 

→ 

19.

If the battery symbol does not flash, the battery is already fully charged or the charging 

temperature is outside the permitted range 

→ 

13.

6.3

Post-connection check

Are the cables and measuring device undamaged (visual inspection)?

Do the cables and charger used comply with the requirements (

→ 

13)?

Do the cables have adequate strain relief?

Are all the connectors firmly seated?

If the battery is charged: is the device ready for operation and does anything appear on the local 
display?

NOTICE

Содержание Teqwave T























































Отзывы:

Нет отзывов