Endress+Hauser Teqwave F, Руководство по эксплуатации

Страница: 36 / 80

Commissioning Teqwave F/I Modbus TCP
36 Hauser
Navigation using transmitter with touch screen
• Settings menu → "Application parameter" → "Measuring unit" → "Concentration 1-2"
• Settings menu → "Application parameter" → "Measuring unit" → "Temperature"
• Settings menu → "Application parameter" → "Measuring unit" → "Density"
Navigation using the Viewer
• Menu "Teqwave Transmitter" → "View settings" → "Concentration 1-2"
• Menu "Teqwave Transmitter" → "View settings" → "Temperature"
• Menu "Teqwave Transmitter" → "View settings" → "Density"
The operating tool communicates the settings to the transmitter as soon as the Apply
button is clicked.
Parameter overview with brief description
Parameter Procedure Selection/input Factory setting
Concentration 1-2 Select the unit for concentration. Depends on the selected concentration app Depends on the selected concentration app
Temperature Select the unit for temperature. • °C
• °F
• K °C
Density Select the unit for density. • g/cm³
• kg/m³
• g/l kg/m³
10.4.4 Configuring the analog output
The Application parameters menu contains the parameters for the configuration of the
analog output.
Navigation using transmitter with touch screen
1. Settings menu → "Application parameters" → "Analog output" → "Analog channel 1-4"
2. Settings menu → "Application parameters" → "Analog output" → "Current/Voltage"
3. Settings menu → "Application parameters" → "Analog output" → "Output settings"
4. Settings menu → "Application parameters" → "Analog output" → "Output settings" →
"Suspend time (s)"
5. Settings menu → "Application parameters" → "Analog output" → "Test signal"
Navigation using the Viewer
1. Menu "Teqwave Transmitter → "Application parameters" → "Analog channel 1-4"
2. Menu "Teqwave Transmitter" → "Application parameters" → "Current/Voltage"
3. Menu "Teqwave Transmitter" → "Application parameters" → "Analog output settings"
4. Menu "Teqwave Transmitter" → "Application parameters" → "Suspend time"
5. Menu "Teqwave Transmitter → "Application parameters" → "Test signal"
The operating tool communicates the settings to the transmitter as soon as the Apply
button is clicked.