Operation
Stamolys CA71CODcr
22
Hauser
5.2
Local operation
The operating keys and the integrated indicator LEDs have the following functions:
5.2.1
Main menu
Access the main menu by holding down the
H
key until “AUTO MEASURING” is displayed.
For the main menu options and information about them, please see the following table.
Key
Key function
Indicator LED function
H
– “Auto measuring” option
– back to the main menu from all sub-menus
Alarm value 1 exceeded
K
– backwards in the sub-menu
(horizontal, see Appendix)
Alarm value 2 exceeded
V
– backwards in the main menu (vertical)
– increase value
Measuring range exceeded
W
– forwards in the main menu (vertical)
– reduce value
Measuring range undershot
F
– select option
– adopt value, forwards in the sub-menu (horizontal)
1)
1) By
pressing
the
V
or
W
and the
F
key simultaneously, you can set the digit after the decimal point.
Retrieve error message
J
– selection in the sub-menu
Cleaning interval is running
Selection
Display
Info
AUTO MEASURING
Calibration, measurement time-controlled actions
PARAMETER ENTRY
Default settings for measuring ranges, alarm values,
calibration
CONFIGURATION
Basic settings such as parameters, measuring units,
arrangement of analog outputs and alarm values, date,
time, offset values
LANGUAGE
Selecting menu language
ERROR DISPLAY
Displaying error messages
MAINTENANCE
For manually emptying the reactor and waste container
and level of the waste container
SERVICE
Manually switching valves and pumps
DATA MEMORY
Last 1024 measured values
MAINTENANCE
DATA MEMORY
