Endress+Hauser StamoLys CA 71 HY, Руководство по эксплуатации

Страница: 38 / 60

Maintenance Stamolys CA71HY
38 Hauser
7.7 Cleaning
"
Caution!
When cleaning, ensure that you do not damage the nameplate on the analyzer. Do not use any
solvent-based cleaning agents.
To clean the analyzer housing, proceed as follows:
• Stainless steel housing (stainless steel SS 1.4301 (AISI 304)):
With a lint-free cloth and Glittol RG 10.51
• GFR housing:
With a damp cloth or with tenside-based (alkaline) cleaning agent.
7.8 Placing out of service
You must place the analyzer out of service before shipping or before extended breaks in operation
(more than 5 days).
"
Caution!
Before placing the instrument out of service, thoroughly rinse all the lines with clean water.
Proceed as follows:
1. Remove the reagent and standard hoses from the canisters and immerse them in a tank
containing clean water.
2. Switch valve 1 to "Standard" and switch pumps 1 and 2 on for one minute (SERVICE menu).
3. Remove the hoses from the water and allow the pumps to run until the hoses are completely
dry.
4. If you are using a continuous sample supply:
Disconnect the sample line.
5. Flush the sampling hoses with clean water and then with compressed air to empty the hoses
completely.
6. Remove the valve hoses from the valves.
7. Release the pump hoses by removing the hose box from the holder from below.
!
Note!
Store open reagent and standard containers in the refrigerator. Bear the shelf life in mind.